אפקט לגיטרה NUX NDO-5 ACE OF TONE DUAL OVERDRIVE
קרא עוד
Nux NDO-5 Ace of Tone Dual Overdrive Effects Pedal
The Ace of Tone is a dual overdrive pedal effects pedal that combines the best features from the Nux Tubeman MKII and the Nux Morning Star. The 2 overdrives have always been favourites having their tones stacked.
To the left, you have the MKII sound which is a high gain overdrive giving you more bass response. Over to the right, you have the distinct SHINE of the Morning star which is a low-gain drive that gives you more room for your treble and making your tone clear.
The Ace of Tone has True bypass circuitry and has a toggle switch to modify how the 2 overdrives stack on your signal chain.
The Tech Features
Brand: Nux
Model: NDO-5 Ace of Tone
Input Impedance: 2.2M Ohm
Output Impedance: 1k Ohm
Current Draw: <100mA
Power Requirement: 9v DC Centre Negative Pin
Dimensions:
- Length: 10.5 cm / 41⁄8”
- WIdth: 11.5 cm / 41⁄2”
- Height: 5.8 cm / 21⁄4”
Weight: 440g / 15.5 oz
Control Panel
Left side (Tubeman)
DRIVE Knob：Controls the gain of Tubeman circuit.
TONE Knob：Controls the treble frequency of Tubeman circuit.
LEVEL Knob：Controls the volume of Tubeman circuit.
Footswitch：Engage/disengage Tubeman circuit. Hold it for 1 second, you can turn on/off FAT mode.
FAT Indicator：While you engaged FAT mode, the indicator will turn on.
Right side
DRIVE Knob：Controls the gain of Morning Star circuit.
TONE Knob：Controls the treble frequency of Morning Star circuit.
LEVEL Knob：Controls the volume of Morning Star circuit.
Footswitch：Engage/disengage Morning Star circuit. Hold it for 1 second, you can turn on/off SHINE mode.
SHINE Indicator：While you engaged SHINE mode, the indicator will turn on.
Routing Toggle Switch：You can adjust the order from Morning Star to Tubeman or Tubeman to Morning Star. It’s very useful to stack the sound.
I/O
Features
2 classic overdrive circuits in one compact enclosure.
Versatile modes and routing design to enhance the tone variety.
Input: Connect your guitar side to INPUT jack.
Output: Connect the OUTPUT signal to amp side.
EXT. SW: You can use external foot controller (like NUX NMP-2) to remote this pedal.
BF/TB Toggle Switch: BF means Buffer-Bypass, TB means True-Bypass. You can choose BF while you connect with several pedals in your signal chain to solve tone-loss situation.
18V/9V Toggle Switch: ACE of TONE can double the voltage internally while you toggle to 18V position, that can increase dynamic range and headroom.
